 |
Accessories |
|
|
CALL TO ORDER YOUR CABLES TODAY!
707-545-0600
M-F 9am to 5pm PST
(Please make sure to have your cable code numbers ready to go!)
|
PEDAL POWER 2 & 2+ CABLES
|
5.5mm x 2.1mm Standard Center Negative (straight)
This is the most common plug type found on Boss, most Ibanez, most Dunlop, MXR (newer Dunlop-era), Line 6 ToneCore (not digital modelers), current Voodoo Lab effects, Prescription, most Fulltone, new DOD, Danelectro, Maxon, Morley, Guyatone, and many more.
PPBAR: $3.50 - Approximately 21” long, end-to-end.
|
|
5.5mm x 2.1mm Standard Center Negative (right-angle)
This is the most common plug type found on Boss, most Ibanez, most Dunlop, MXR (new Dunlop-era), Line 6 ToneCore (not digital modelers), current Voodoo Lab effects, Prescription, most Fulltone, new DOD, Danelectro, Maxon, Morley, Guyatone, and many more.
PPBAR-R: $3.50 - Approximately 20” long, end-to-end.
|
|
5.5mm x 2.5mm “Red” Barrel (straight)
Designed to power the Line 6 DL4, MM4, FM4, DM4, and AM4 digital
modeling pedals which require a reverse polarity cable, and a 5.5mm x
2.5mm end.
PPL6: $3.50 - Approximately 21” long, end-to-end.
|
 |
5.5mm x 2.5mm “Red” Barrel (right-angle)
Designed to power the Line 6 DL4, MM4, FM4, DM4, and AM4 digital
modeling pedals which require a reverse polarity cable, and a 5.5mm x
2.5mm end.
PPL6-R: $3.50 - Approximately 20” long, end-to-end.
|
|
5.5mm x 2.1mm “White” Barrel – Reverse Polarity (straight)
Designed for reverse polarity powered units like the JangleBox, Fulltone SoulBender, '69, and Octafuzz. Also powers the Moogerfooger MF-101 Lowpass Filter, MF-102 Ring Modulator, MF-103 Phaser, and DMC/Voodoo Lab Cab-Tone.
PPREV: $3.50 - Approximately 21” long, end-to-end.
|
 |
5.5mm x 2.1mm “White” Barrel – Reverse Polarity (right-angle)
5.5mm x 2.1mm “White” Barrel – Reverse Polarity (right-angle) Designed for reverse polarity powered units like the JangleBox, Fulltone SoulBender, '69, and Octafuzz.
PPREV-R: $3.50 - Approximately 20” long, end-to-end.
|
 |
3.5mm - 1/8” Mini Plug (straight)
This plug is commonly found on most older/vintage MXR, DOD, Electro-Harmonix, Pro-Co (Rat series), Klon Centaur, and (non-LED) Voodoo Lab pedals.
PPMIN: $3.50 - Approximately 21” long, end-to-end.
|
 |
3.5mm - 1/8” Mini Plug (right-angle)
This plug is commonly found on most older/vintage MXR, DOD, Electro-Harmonix, Pro-Co (Rat series), Klon Centaur, and (non-LED) Voodoo Lab pedals.
PPMIN-R: $3.50 - Approximately 20” long, end-to-end.
|
 |
9V Battery Snap (straight)
Allows you to power your 9V battery effects that don’t have an external power jack. Great for powering vintage effects that you don’t want to modify like a Fuzz Face or Cry Baby wah. Works with any effect that runs on 9V including Z-Vex, older Ibanez, MXR, and more.
PPBAT: $3.50 - Approximately 21” long, end-to-end.
|
 |
18v/24v 5.5mm x 2.1mm (straight)
Combines two Pedal Power outputs (both in standard 9V mode) to create 18V. Great for powering pedals like the MXR Flanger and Dime Distortion, Crybaby 535Q, and various Fulltone and Keeley products.
PPY: $10.00 - Approximately 20” long, end-to-end.
|
 |
18v/24v 5.5mm x 2.5mm - Reverse Polarity (straight)
Combines two Pedal Power outputs (both in 12V mode) to create 24V. Used to power various Electro-Harmonix effects like the Deluxe Memory Man, Stereo Memory Man, Deluxe Electric Mistress, Micro Synthesizer, Bass Micro Synthesizer, Q-tron, Q-tron +, Stereo Polychorus, and Worm pedals. (Also powers the Flanger Hoax which uses this reverse polarity cable, but only requires 18V (set both Pedal Power outs to standard 9V.)
PPEH24: $10.00 - Approximately 20” long, end-to-end.
|
 |
5.5mm x 2.1mm Cable With No End Plug (straight)
This cable is bare on the end and has one straight 5.5mm x 2.1mm plug to connect to the Pedal Power. Use this to make your own longer length or custom cables!
(Soldering required.)
PP36: $3.50 - Approximately 36” long.
|
 |
5.5mm x 2.1mm Cable With No End Plug (right-angle)
This cable is bare on the end and has one right-angle 5.5mm x 2.1mm plug to connect to the Pedal Power. Use this to make your own longer length or custom cables!
PP36-R: $3.50 - Approximately 36” long.
|
PEDAL POWER AC CABLES
 |
PPAC Only - 5.5mm x 2.5mm Dual “Red” Barrel (straight)
Designed for use with the Pedal Power AC only, this cables powers units like the Digitech Whammy, Line 6 Digital Modelers (DL4, MM4, FM4, DM4, and AM4), and the Mesa-Boogie Bottle Rocket and V-Twin. Also powers the Digital Music Corp/Voodoo Lab Ground Control, Ground Control Pro, and Pedal Switcher. (Please note that the Digitech Whammy can only be powered by this cable and a Pedal Power AC. The Pedal Power 2 Plus is DC only and will NOT power a Whammy regardless of what cable you use with it!)
PABAR: $3.50 - Approximately 21” long, end-to-end.
|
 |
5.5mm x 2.1mm Barrel (straight)
Designed to power the Hughes & Kettner Tube Factor, Tube Rotoshpere
MKII, Replex, or Tubeman pedals which require a 5.5mm x 2.1mm end.
PPL6: $3.50 - Approximately 21” long, end-to-end.
|
 |
5.5mm x 2.1mm Barrel (right-angle)
Designed to power the Hughes & Kettner Tube Factor, Tube Rotoshpere
MKII, Replex, or Tubeman pedals which require a 5.5mm x 2.1mm end.
PPL6-R: $3.50 - Approximately 20” long, end-to-end.
|
|
PPAC Only - 5.5mm x 2.5mm “Red” Barrel With No End Plug (straight)
This cable is bare on the end and has one straight 5.5mm x 2.5mm plug to connect to the Pedal Power AC. Use this to make your own longer length or custom cables!
(Soldering required.)
PA36: $3.50 - Approximately 36” long.
|
|
|
