Search found 43 matches

by Monsta-Tone
Thu Aug 24, 2017 8:40 pm
Forum: Pedalboards and Effects
Topic: PX-8 Plus - Presets Question
Replies: 3
Views: 3059

Re: PX-8 Plus - Presets Question

Thanks John. Please keep this in mind for future updates. Also, if it were in any way possible, it would be extremely handy to be able to access all 8 presets from the 8 buttons. Maybe the Bank Up button could be held for 2 seconds to toggle back and forth between standard setup and 8 available pres...
by Monsta-Tone
Thu Aug 17, 2017 12:09 pm
Forum: Pedalboards and Effects
Topic: PX-8 Plus - Presets Question
Replies: 3
Views: 3059

PX-8 Plus - Presets Question

I am very interested in the PX-8 Plus! I've been wanting a pedal looper that sends midi commands for a very long time. When in Preset mode, can the PX-8 preset buttons toggle between the previous preset and the preset assigned to the button that was pushed? For instance: Preset 1 is clean rhythm for...
by Monsta-Tone
Thu Mar 10, 2016 12:55 pm
Forum: Racks, Switching Systems and MIDI
Topic: Can the HEX do ABY switching?
Replies: 4
Views: 1815

Re: Can the HEX do ABY switching?

Ok, thanks.

I do run both preamps at the same time. It sounds incredible once I get rid of the ground loops.
I can run one clean and one distorted, or both clean, etc..
I can also run one distorted, and the other one distorted with the built in graphic EQ turned on.
by Monsta-Tone
Thu Mar 10, 2016 9:16 am
Forum: Racks, Switching Systems and MIDI
Topic: Can the HEX do ABY switching?
Replies: 4
Views: 1815

Re: Can the HEX do ABY switching?

GSP1101 Send split to both combo amps Instrument Inputs. Thanks John, This is the part I'm trying to figure out how to do properly. Someone on the Gear Page suggested the Lehle P-Split. I was hoping the HEX could do it so that I would have the ability to isolate one amp or the other if I wanted to....
by Monsta-Tone
Wed Mar 09, 2016 12:23 pm
Forum: Racks, Switching Systems and MIDI
Topic: Can the HEX do ABY switching?
Replies: 4
Views: 1815

Can the HEX do ABY switching?

I love playing in stereo. I've been using a Triaxis and 20/20 power amp, but the rack is really heavy by the time I add a power conditioner, preamp, power amp, and processor. I'd like to simplify my rig down to this: 2 - 20 watt Mesa combos (DC-2 and Rectoverb 25) Digitech GSP1101 (all amp and cab s...
by Monsta-Tone
Thu Apr 02, 2015 11:40 am
Forum: Pedal Power®
Topic: Can Pedal Power 4x4 do this?
Replies: 4
Views: 1854

Re: Can Pedal Power 4x4 do this?

Thanks John!
What about a Crocodile Tail One Control?
It takes 9VDC @ 450ma

Thanks again,
Andy
by Monsta-Tone
Mon Mar 30, 2015 10:59 am
Forum: Racks, Switching Systems and MIDI
Topic: Control Switcher Midi Thru Question
Replies: 6
Views: 2022

Re: Control Switcher Midi Thru Question

:mrgreen: That is a great site! Prices are not that bad, and they have everything I needed to build my pedal board and some 5 pin midi cables. Thanks!

Just realized that I forgot to add the midi splitter to my cart though......
by Monsta-Tone
Mon Mar 30, 2015 8:52 am
Forum: Racks, Switching Systems and MIDI
Topic: Control Switcher Midi Thru Question
Replies: 6
Views: 2022

Re: Control Switcher Midi Thru Question

Thanks! It's really hard to find 5 pin active midi cables. Seems like 80% of them are 3 pin only.

I will look through my midi cables and see what I have today. If that doesn't work, I guess I'll have to get a midi splitter.
by Monsta-Tone
Sun Mar 29, 2015 10:42 am
Forum: Racks, Switching Systems and MIDI
Topic: Control Switcher Midi Thru Question
Replies: 6
Views: 2022

Re: Control Switcher Midi Thru Question

I tried 3 different cables between the Control Switcher and Infinity, all with the same results. I did not think to see if they are 5 pin active though. I should have some. Thanks, I'll give that a try this afternoon. Is that the basic rule of thumb? When using Midi Thru, use a 5 pin active cable? I...
by Monsta-Tone
Sat Mar 28, 2015 1:52 pm
Forum: Racks, Switching Systems and MIDI
Topic: Control Switcher Midi Thru Question
Replies: 6
Views: 2022

Control Switcher Midi Thru Question

Hey guys, I am using a Control Switcher to change channels on my amp. I recently added Pigtronix Infinity looper to my setup and wanted to use it via midi with my footswitch. My processor only has 1 Midi Send. The Infinity does not have Midi Through or Out I ran the Midi from my processor to the Con...