Search found 157 matches

by domct203
Wed Jul 10, 2013 11:35 am
Forum: Racks, Switching Systems and MIDI
Topic: Mesa Boogie GCX slave and Axe FX wet/dry rig
Replies: 18
Views: 3515

Re: Mesa Boogie GCX slave and Axe FX wet/dry rig

As mentioned more than once in this thread and on the Fractal Forum, the Axe - just as any other amp or preamp - really doesn't want to see a line level signal at the Instrument Input jack. Maybe I should have stated "if the Rear-Inputs can handle Line-Level". But I though that would already be cle...
by domct203
Wed Jul 10, 2013 9:49 am
Forum: Racks, Switching Systems and MIDI
Topic: Mesa Boogie GCX slave and Axe FX wet/dry rig
Replies: 18
Views: 3515

Re: Mesa Boogie GCX slave and Axe FX wet/dry rig

The slave out is simply a line level output, tapped off the Output Transformer, and is intended to drive other line-level items, like FX Processors & power amps. It is what I use (on my Mesa Roadster) to drive my wet amps in a W/D/W setup. If the Ax-FX can handle a line-level input you will be fine....
by domct203
Tue Jan 29, 2013 8:29 am
Forum: Racks, Switching Systems and MIDI
Topic: Ground Control MIDI Switching Issue
Replies: 1
Views: 925

Re: Ground Control MIDI Switching Issue

Are you still able to control the third unit if it is the only one connected to the GC? How about if you swap the positions of the second and third unit? Is it possible that a setting for the MIDI thru on the second unit could have been accidentally changed? Do these units have a MIDI out as well as...
by domct203
Fri Dec 28, 2012 10:17 am
Forum: Racks, Switching Systems and MIDI
Topic: GC Pro + Control Switcher + Mesa Roadster: channel switching
Replies: 2
Views: 1068

Re: GC Pro + Control Switcher + Mesa Roadster: channel switc

I'm using a GCX, Control Switcher and GC Pro with a Mesa Roadster combo. For a while, I've been using the GC Pro in 4 preset mode with each preset, 1-4, in each bank, selecting channels 1-4 of the amp, using the Control Switcher to change amp channels. I've been thinking about changing things aroun...
by domct203
Wed Nov 14, 2012 6:22 am
Forum: Racks, Switching Systems and MIDI
Topic: SIMPLE QUESTION: What do you use to label the GC Pro?
Replies: 2
Views: 989

Re: SIMPLE QUESTION: What do you use to label the GC Pro?

I made my labels in a graphics editor (CorelDRAW), printed them at my local Walgreens as an 8X10 picture, cut 'em out and stuck 'em on with 3M re-usable sticky tabs http://www.amazon.com/Scotch-Restickable-Inches-Squares-R100/dp/B0039N3QO2/ref=pd_cp_hi_3 I labeled the Wah, Volume and Boost with a P-...
by domct203
Wed Nov 07, 2012 5:23 am
Forum: Racks, Switching Systems and MIDI
Topic: Hey there.. A few questions about GCX / GCP + a Roadster
Replies: 3
Views: 860

Re: Hey there.. A few questions about GCX / GCP + a Roadste

3) I plan on setting up my 4 preset buttons to handle the 4 channels in my amp + bring up a preset on the Gmajor2. Is there anyone else using IA's for Channel Switching on a Roadster or 3ch Dual Rec? I use a Control Switcher for channel switching of my Roadster (which looks like half a GCX to the G...
by domct203
Fri Nov 02, 2012 8:23 am
Forum: Racks, Switching Systems and MIDI
Topic: GCP/GCX/POD 2.0
Replies: 4
Views: 1139

Re: GCP/GCX/POD 2.0

Where you place the POD (in front or in the loop) really depends on what YOU want from the POD. Either way if you plan to bypass the POD's effects while playing then put it in a GCX loop. If you are phantom powering the GCP then connect the GCP MIDI OUT to the GCX MIDI (pedal) IN, then connect the C...
by domct203
Fri Nov 02, 2012 7:55 am
Forum: Racks, Switching Systems and MIDI
Topic: GCX and Xotic BB+
Replies: 3
Views: 971

Re: GCX and Xotic BB+

how do i connect an effect like the xotic bb+ to switch from channel a to channel b thru the gcx? is there a special cable needed? After reading the BB+ manual it appears that this can not be done as there is no external control interface on the pedal to do what you ask. Because of this design in t...
by domct203
Fri Nov 02, 2012 4:13 am
Forum: Racks, Switching Systems and MIDI
Topic: GCP/GCX/POD 2.0
Replies: 4
Views: 1139

Re: GCP/GCX/POD 2.0

Just purchased a POD 2.0 and before I start the process of connecting everything together I want to ask the VL community if anyone can sugguest the best way to connect or examples of how they connect the POD 2.0 with Voodoo Labs ground control pro and GCX audio switcher? I see in the manuals that P...
by domct203
Sun Oct 28, 2012 2:59 pm
Forum: Racks, Switching Systems and MIDI
Topic: Controlling my Mini Rectifier with Pod HD 500 (Foot Switcer)
Replies: 1
Views: 1134

Re: Controlling my Mini Rectifier with Pod HD 500 (Foot Swit

Hello,
Which Voodoo Lab product are you referring to as the "Foot Switcher".

Does your POD have a relay to do the channel switching on your Mini Recto?

Dom