Search found 315 matches

by Rez
Wed May 22, 2019 9:24 am
Forum: Pedal Power®
Topic: Old Voodoo Lab power supply
Replies: 1
Views: 18

Re: Old Voodoo Lab power supply

Specification for Pedal Power (original/earliest model):

With the DIP switch in the ON position (away from the number), all 8 outputs supply 9VDC @ 80mA.

With the DIP switch in the OFF position (towards the number), all 8 outputs supply 12.3 VDC @ a little less than 80mA.


Cheers!
by Rez
Mon May 20, 2019 12:41 pm
Forum: Pedal Power®
Topic: Tape Delay AND Whammy?
Replies: 3
Views: 31

Re: Tape Delay AND Whammy?

;)
by Rez
Mon May 20, 2019 10:40 am
Forum: Pedal Power®
Topic: Tape Delay AND Whammy?
Replies: 3
Views: 31

Re: Tape Delay AND Whammy?

I'd check to confirm that the supply is not getting hot (but warm is fine). If it's not getting hot and the pedals are all working, I'd power them all exactly as you've specified... Rock on.

Otherwise, perhaps power the Whammy from the AC courtesy outlet with its adapter/wall-wart.

Cheers!
by Rez
Tue May 14, 2019 10:13 am
Forum: Pedal Power®
Topic: PP2+ DIP Switches
Replies: 1
Views: 55

Re: PP2+ DIP Switches

Pedal Power 2 Plus DIP switch function: Setting any DIP switches 1-8 to NORMAL/9V will put the corresponding output 1-8 into its 9VDC setting . Setting any DIP switches 1-6 to away from NORMAL will put the corresponding output 1-6 into its 12VDC setting . Setting any DIP switches 7-8 to away from N...
by Rez
Mon Apr 29, 2019 10:16 am
Forum: Pedal Power®
Topic: PP2+ and EHX Stereo MM Hazarai
Replies: 1
Views: 93

Re: PP2+ and EHX Stereo MM Hazarai

Yes.

To power the Stereo Memory Man with Hazarai use Pedal Power 2 Plus output 5 or 6, DIP switch set normal with one of the all black (standard polarity) cables supplied.

Cheers!
by Rez
Fri Apr 26, 2019 10:59 am
Forum: Pedal Power®
Topic: Vibe-Baby power supply
Replies: 1
Views: 61

Re: Vibe-Baby power supply

To power the 18V Classic Amplification Vibe Baby with Pedal Power ISO-5, simply use the 18V output with one of the all black (standard polarity) cables supplied. Or, to power the 18V Classic Amplification Vibe Baby with Pedal Power 2 Plus, use outputs 5 and 6, DIP switches set to NORMAL (9V), with a...
by Rez
Mon Apr 22, 2019 3:33 pm
Forum: Pedal Power®
Topic: 3 x Pedal Power 2+ Connected by Courtesy?
Replies: 1
Views: 99

Re: 3 x Pedal Power 2+ Connected by Courtesy?

Yes, it is fine to chain three (or even more) Pedal Power 2 Plus supplies together as you suggest... powering the 2nd from the AC courtesy outlet of the 1st, the 3rd from the AC courtesy outlet of the 2nd, etc. And there are no "drawbacks" to powering as such. But, if the power cords are too long, y...
by Rez
Mon Apr 22, 2019 3:27 pm
Forum: Pedal Power®
Topic: EHX Lester K and voodoo plus?
Replies: 1
Views: 88

Re: EHX Lester K and voodoo plus?

Yes. To power the Lester K with Pedal Power 2 Plus, use output 5 or 6, its DIP switch set normal and one of the all black (standard polarity) cables supplied.

Cheers!
by Rez
Thu Apr 18, 2019 4:59 pm
Forum: Pedal Power®
Topic: Voodoo Lab Pedal Power 4X4
Replies: 1
Views: 193

Re: Voodoo Lab Pedal Power 4X4

Pedal Power 4 x 4 has a total of 8 isolated outputs... of which two are 9V/12V "paired outputs". These paired outputs allow you the ability to power either a 9VDC or a 12VDC pedal simply by plugging into the correct output 9V or 12V from the pair (generally, leaving the other from the pair empty). ...
by Rez
Mon Apr 15, 2019 12:52 pm
Forum: Pedal Power®
Topic: Pedal Power 2+, Current Draw for BodyRez
Replies: 1
Views: 152

Re: Pedal Power 2+, Current Draw for BodyRez

I don't have a more precise value, sorry. But, you could do a comparison: powering it from a 100mA vs from a 250mA output. There's no risk of damage in testing as such.


Cheers!