Search found 7459 matches

by JohnClark
Wed Jun 03, 2020 10:52 am
Forum: Racks, Switching Systems and MIDI
Topic: Control Switcher help!
Replies: 11
Views: 726

Re: Control Switcher help!

Ahh the plot thickens! I thought you had only the two Control Switchers going here. Lets start fresh... First, what are all the Voodoo Lab / Digital Music Corp. controllers and Switcher that will be in this rig? Also, what will be your preferred MIDI Cable connection path? So far I believe you have ...
by JohnClark
Tue Jun 02, 2020 10:49 am
Forum: Racks, Switching Systems and MIDI
Topic: Control Switcher help!
Replies: 11
Views: 726

Re: Control Switcher help!

When mimicking a GCX, this will take one of the four available GCX locations in the Ground Control Pro.

Here is a link to the red button Control Switcher Manual... Control Switcher v2 (Red Buttons)

Let us know if you run into any troubles!
by JohnClark
Tue Jun 02, 2020 10:01 am
Forum: Racks, Switching Systems and MIDI
Topic: Control Switcher help!
Replies: 11
Views: 726

Re: Control Switcher help!

No problem to control two Control Switchers as a single GCX. The basic steps from factory fresh are as follows... 1. Set both Control Switchers to receive on MIDI Channel 16. 2. Set both Control Switchers to Enable Control Change messages. 3. On Control Switcher #1, set to respond to Control Change ...
by JohnClark
Wed Apr 01, 2020 10:30 am
Forum: Racks, Switching Systems and MIDI
Topic: GCP and BOSS FV-500L
Replies: 3
Views: 1624

Re: GCP and BOSS FV-500L

The main problem of not being able to reach the full data value of 127 is because the 10K potentiometers are a bit too low for the Ground Control Pro and together they are pulling the reference voltage for the expression pedals circuit down too low. You can modify the Ground control Pro to accept th...
by JohnClark
Wed Apr 01, 2020 10:10 am
Forum: Racks, Switching Systems and MIDI
Topic: GCX LOOPS AND RJM PBC10
Replies: 1
Views: 1411

Re: GCX LOOPS AND RJM PBC10

Unless the GCX is modified to have Stereo Loops, all the loops will be Mono. For your setup you will likely just use two Loops for each Stereo Device you want to switch. I'll use GCX Loops 7 and 8 for an example, but you can use any two GCX Loops you want for the Intellifex: 1. PBC Left Output to GC...
by JohnClark
Wed Apr 01, 2020 10:01 am
Forum: Racks, Switching Systems and MIDI
Topic: Boss ES-8 and GCX
Replies: 8
Views: 4349

Re: Boss ES-8 and GCX

No problem to program only for the number of Loops you are currently using.

Good Luck!
by JohnClark
Tue Mar 17, 2020 12:42 pm
Forum: Pedal Power®
Topic: Pedal power 2 plus setup
Replies: 1
Views: 1097

Re: Pedal power 2 plus setup

I’d suggest using the Courtesy Outlet on the back of the Pedal Power 2+ for the Avalanche Run using its supplied power adapter. This will leave outputs 5 and 6 to power the Tensor and Blue Sky.

I hope that helps!
by JohnClark
Mon Mar 16, 2020 2:18 pm
Forum: Pedalboards and Effects
Topic: Connecting a PX8+ and a control switcher
Replies: 2
Views: 2052

Re: Connecting a PX8+ and a control switcher

Welcome! Here are some answers to your questions. 1. The Control Switcher will connect to the PX-8 via a MIDI Cable. MIDI Out of the PX-8+ to the MIDI In on the Control Switcher. 2. The Control Switcher won't take up any of the PX-8+ Loops. You will still have all eight PX-8+ Loops for effects. Addi...
by JohnClark
Mon Mar 16, 2020 10:06 am
Forum: Pedal Power®
Topic: PP2+ courtesy to power an 18v MXR pedal?
Replies: 1
Views: 1332

Re: PP2+ courtesy to power an 18v MXR pedal?

The Courtesy Outlet is rated for up to 200 Watts... the 18V Adapter you want to use is probably rated at less that 15Watts, so no problem at all!

I hope that helps!
by JohnClark
Mon Mar 16, 2020 10:04 am
Forum: Racks, Switching Systems and MIDI
Topic: PX8+ and Commander
Replies: 2
Views: 1988

Re: PX8+ and Commander

The Commander will work with the PX-8 or PX-8+, and will be phantom powered via the MIDI Cable. The PX-8/PX-8+ can be added to this Pedal Switcher rig or it can replace the Pedal Switchers. The only difference is that the preset save function will need to be performed on the PX-8/PX-8+ itself rather...