Search found 46 matches

by Marlboro05
Sun Feb 10, 2019 5:36 am
Forum: Racks, Switching Systems and MIDI
Topic: Ground loop - Korg DTR1
Replies: 4
Views: 65

Re: Ground loop - Korg DTR1

I’d not remove the earth from a power cable. Can you open it up and see if there is an earth jumper to remove the earth to chassis from the signal? Or make a patch cable without an earth for the tuner? Run the patch cable through the buffer on your GCX then to your tuner? Run the patch cable through...
by Marlboro05
Thu Feb 07, 2019 10:43 pm
Forum: Racks, Switching Systems and MIDI
Topic: PLEASE HELP SETUP 2 GCX's
Replies: 10
Views: 286

Re: PLEASE HELP SETUP 2 GCX's

Hi Geoff,
Here is a good article on pedal placement, as it says though, there is no right or wrong. What’s right is what sounds good to you.

https://www.strymon.net/setting-up-your ... nal-chain/

Cheers
by Marlboro05
Mon Feb 04, 2019 3:28 am
Forum: Racks, Switching Systems and MIDI
Topic: GCX/GCP + G-Major 2 IA buttons
Replies: 4
Views: 157

Re: GCX/GCP + G-Major 2 IA buttons

Hi firsttimer, The first thing you need to do is set up the GMajor2, you need to choose the Midi channel it will use, then set it up so that you can use CC msgs from the GC Pro to turn effects on and off. I’m not near one at the moment but I’m pretty sure it’s the mod button below the global button,...
by Marlboro05
Sun Feb 03, 2019 4:59 pm
Forum: Racks, Switching Systems and MIDI
Topic: PLEASE HELP SETUP 2 GCX's
Replies: 10
Views: 286

Re: PLEASE HELP SETUP 2 GCX's

Hi Geoff, Damn, would have thought it would have an effects loop. If it did the EQ’s and the mod, delay, reverb etc pedals would go in there. Yep groups are the go with what you have. You can have all of them in seperate loops on the GCX and create presets with the groups or put groups together in l...
by Marlboro05
Sat Feb 02, 2019 6:20 pm
Forum: Racks, Switching Systems and MIDI
Topic: PLEASE HELP SETUP 2 GCX's
Replies: 10
Views: 286

Re: PLEASE HELP SETUP 2 GCX's

The feedthru and the in are joined together as long as you don’t have anything plugged in to the front feed thru.
by Marlboro05
Sat Feb 02, 2019 6:18 pm
Forum: Racks, Switching Systems and MIDI
Topic: PLEASE HELP SETUP 2 GCX's
Replies: 10
Views: 286

Re: PLEASE HELP SETUP 2 GCX's

Hi Geoff,
Are you using any in the loop? I see you have 3 EQ pedals, you might want one before and a couple in the loop to choose from? Maybe you would like the delay and choruses in the loop to?
by Marlboro05
Tue Jan 29, 2019 6:09 am
Forum: Racks, Switching Systems and MIDI
Topic: Loops Gcx not engaging
Replies: 7
Views: 277

Re: Loops Gcx not engaging

Hi there,
I have a Pedal Power AC and power the GCX with it, which in turn powers the GC Pro but I also ran jump wires from the Midi in to the Midi out to Power a second GC Pro. It all works good.
by Marlboro05
Tue Jan 29, 2019 6:04 am
Forum: Racks, Switching Systems and MIDI
Topic: Will GCX Phantom Power a BJ-Devices MIDI Controller?
Replies: 2
Views: 182

Re: Will GCX Phantom Power a BJ-Devices MIDI Controller?

Hi Nyteowl,
Yes it will, should be plug and play. Well, sort of.
by Marlboro05
Fri Jan 25, 2019 9:35 am
Forum: Racks, Switching Systems and MIDI
Topic: Mesa Boogie Triple Rectifier using midi through Control Switcher into Line 6 Helix HX
Replies: 3
Views: 374

Re: Mesa Boogie Triple Rectifier using midi through Control Switcher into Line 6 Helix HX

Hi there,
I’ve just had a look at the both of them, doesn’t look like the Control Switcher will work with the RNN cable. The RJM units have 7 pins and the Voodoo has 5 pins.
by Marlboro05
Fri Jan 25, 2019 7:31 am
Forum: Racks, Switching Systems and MIDI
Topic: Mesa Boogie Triple Rectifier using midi through Control Switcher into Line 6 Helix HX
Replies: 3
Views: 374

Re: Mesa Boogie Triple Rectifier using midi through Control Switcher into Line 6 Helix HX

Hi there Bearded one, I have a DualRectifier and use the RJM Mini Amp Gizmo with the RNN cable. https://shop.rjmmusic.com/mesa-rrn-rectifier-road-king-nomad-cable/ I’m not certain but I’m pretty sure that this cable will work with the Voodoo Labs Control Switcher. It has a relay box on it to supply ...