Search found 259 matches

by Marlboro05
Mon Sep 27, 2021 6:10 pm
Forum: Racks, Switching Systems and MIDI
Topic: The buttons number 5 and edit do not work
Replies: 2
Views: 314

Re: The buttons number 5 and edit do not work

Hi there, Since you have it apart, have you used a multimeter to see if the switches actually switch? I know you can get these switches from electronic distributors, so if you are good with a soldering Iron you can do it yourself or get someone to do it. If you are in the US, email or Call Voodoo an...
by Marlboro05
Mon Sep 27, 2021 6:07 pm
Forum: Racks, Switching Systems and MIDI
Topic: Magic stomp stereo hook up
Replies: 1
Views: 149

Re: Magic stomp stereo hook up

Hi there, if you have a stereo setup, you will have 2 paths. So you have 2 amps etc. If you Yamaha Stomp is your stereo split, it is first in line. So, all mono effects go before this, like you distortion, boost etc. then after this it becomes L & R. So feed the loop ie. Loop 1 In (if no other pedal...
by Marlboro05
Mon Aug 30, 2021 4:54 am
Forum: Pedalboards and Effects
Topic: New set up for analog pedals and PC-8 Plus
Replies: 1
Views: 598

Re: New set up for analog pedals and PC-8 Plus

Hi there, Some nice gear there, should get some good tones out of your setup. I’d set it up as follows: Wireless-> Polytune-> Morley (I’d only put it here if you use as a wah & volume pedal)-> PX8+ In-> PX8+ SND Loop 1-> Mesa Flux Five In-> Mesa Out-> PX8+ RTN Loop 1-> PX8+ SND Loop 2-> Fender Pugil...
by Marlboro05
Mon Aug 30, 2021 4:17 am
Forum: Racks, Switching Systems and MIDI
Topic: Soldano SLO + Eventide H9 + VL Control Switcher + MFC 101
Replies: 1
Views: 462

Re: Soldano SLO + Eventide H9 + VL Control Switcher + MFC 101

Hi there, Which Soldano SLO model do you have? Does it have the effects loop? Is the effects loop he switchable one? The Control switcher can switch the SLO, via midi.I can receive PC and CC messages via midi and can control either 4 of the switches in any combination. If the SLO has a foot switchab...
by Marlboro05
Fri Aug 20, 2021 2:13 am
Forum: Racks, Switching Systems and MIDI
Topic: @Liquid Foot users
Replies: 1
Views: 375

Re: @Liquid Foot users

Hi there, I’ve not used a different controller other than a GC Pro, but I know if you do use a different controller, the state of every GCX loop must be sent with every preset or they state that they are in will be kept.

Here’s some info for you

viewtopic.php?t=8268
by Marlboro05
Sat Aug 14, 2021 9:58 pm
Forum: Racks, Switching Systems and MIDI
Topic: Control Switch questions
Replies: 1
Views: 4439

Re: Control Switch questions

Hi there, You need to make a custom cable out of a 5 pin midi cable and get a 7 pin plug. You need to connect the Pins 1 & 3 to 6 & 7 instead. If you can’t do it, you may be able to find someone to do it for you. The reason you have these faults is probably due to the Plethora x5 using 1 & 3 as midi...
by Marlboro05
Sat Aug 14, 2021 9:50 pm
Forum: Racks, Switching Systems and MIDI
Topic: Control Switcher Question – Lead/Rhythm problem on Mesa Studio Pre
Replies: 1
Views: 2675

Re: Control Switcher Question – Lead/Rhythm problem on Mesa Studio Pre

Hi there,
To do this with your Disaster Area DPC 8 EZ Gen 3, you need to add another controller to it, such as their Midi Baby. There isn’t a way to do this, with this being set up in preset mode.
Hope this helps you out.
by Marlboro05
Sat Aug 14, 2021 9:44 pm
Forum: Racks, Switching Systems and MIDI
Topic: GCP - Method for multiple midi devices ?
Replies: 1
Views: 2705

Re: GCP - Method for multiple midi devices ?

Hi here, You just daisy chain them, one after the other. GC Pro out-> Midi Device 1 midi in (usually a GCX which is pedal in)> Midi Device 1 thru (GCX is midi out) -> Midi Device 2 midi in-> Midi Device 2 midi thru (use midi device thru instead of midi device out)-> Midi Device 3 midi in and so on. ...
by Marlboro05
Fri Aug 13, 2021 5:07 pm
Forum: Racks, Switching Systems and MIDI
Topic: Separating Instant Access and Midi Functions in different Banks
Replies: 2
Views: 2773

Re: Separating Instant Access and Midi Functions in different Banks

Hi there,
You can’t do this with the GC Pro, it can’t only bank up and down the presets. The only way to do what you want, with a GC Pro, is with 2 of them. One with the beta firmware 2.0. This will give you 2 banks of 12 instant access switches, so 24. Hope this helps you out.
by Marlboro05
Wed Aug 11, 2021 1:29 am
Forum: Racks, Switching Systems and MIDI
Topic: Can Any Kind Soul Make me a Diagram
Replies: 14
Views: 13404

Re: Can Any Kind Soul Make me a Diagram

Yes, if you are going to use the buffer, you need to go to the guitar in on the second GCX. So go from your GCX 1 to rear guitar thru, little loop cable, then out the guitar out on the rear. I’d only use it if you have to. If it makes it sound better after you put it in the circuit. You are already ...