Search found 44 matches

by toolshed
Thu Dec 30, 2010 7:29 am
Forum: Racks, Switching Systems and MIDI
Topic: Dual Rect Switching Question
Replies: 4
Views: 1463

Re: Dual Rect Switching Question

With channels two and three off on the gcp then channel one should be on
by toolshed
Thu Dec 23, 2010 1:37 pm
Forum: Racks, Switching Systems and MIDI
Topic: Rig control with GCX help!?
Replies: 4
Views: 1659

Re: Rig control with GCX help!?

this helped me alot too....

http://www.voodoolab.com/gcx.htm

at the bottom there are many different ways to wire up your switcher to your amps and whatever else your interested in placing into the switchers way.
by toolshed
Thu Dec 23, 2010 1:18 pm
Forum: Racks, Switching Systems and MIDI
Topic: Rig control with GCX help!?
Replies: 4
Views: 1659

Re: Rig control with GCX help!?

dude, not a problem. this system is so easy to understand you usually will find yourself over thinking things. if your are running your processor in front of the amps then switch the gcx to the 8 instant access and 4 patch mode instead of all switches calling up midi programs. Then place the fx proc...
by toolshed
Wed Dec 22, 2010 1:16 pm
Forum: Racks, Switching Systems and MIDI
Topic: channel switching for a old rivera knucklehead
Replies: 3
Views: 2209

Re: channel switching for a old rivera knucklehead

let me also correct to say that this amp uses a fs7 footswitch.... i am using the gcp and gcx to contol a 2120 processor, 3 fx pedals, a peavey 5150 and a rivera knucklehead k-100 by channel switching and by using both amps simutaniously and by themselves..
by toolshed
Wed Dec 22, 2010 6:12 am
Forum: Racks, Switching Systems and MIDI
Topic: channel switching for a old rivera knucklehead
Replies: 3
Views: 2209

Re: channel switching for a old rivera knucklehead

i just wanted to post this incase someone else has the same problem i did... if you need to channel switch a rivera knucklehead k-100 please note that the yellow wire is ground pin 2, the blue wire is for switching pin 3, the orange wire is for boost one pin4 and the ninja boost green and pin 5. Thi...
by toolshed
Tue Dec 21, 2010 8:45 pm
Forum: Racks, Switching Systems and MIDI
Topic: channel switching for a old rivera knucklehead
Replies: 3
Views: 2209

channel switching for a old rivera knucklehead

the footswitch cable is a seven pin din plug that i plan to cut... I plan so solder the channel switching wires to the tip and ground to the sleeve... anyway... does anyone know where i can find the diagram or schematic for the channels on an fs-7 foot switch? has anyone else had an issue with this?...
by toolshed
Tue Dec 21, 2010 5:22 am
Forum: Rig Pictures
Topic: here is my rig....
Replies: 0
Views: 4530

here is my rig....

just wanted to share a pic of my setup. i could not have completed it if it weren't for people on this forum... thanks so much...

http://www.facebook.com/photo.php?pid=3 ... 1516239600
by toolshed
Mon Dec 20, 2010 2:37 pm
Forum: Racks, Switching Systems and MIDI
Topic: using two amps simutaniously and one at a time...
Replies: 2
Views: 1112

Re: using two amps simutaniously and one at a time...

nevermind.... i figured it out..haha
by toolshed
Mon Dec 20, 2010 2:31 pm
Forum: Racks, Switching Systems and MIDI
Topic: using two amps simutaniously and one at a time...
Replies: 2
Views: 1112

using two amps simutaniously and one at a time...

so i have ran out of a send of the gcx to the amp.... do i need to run the fx loop send back to the gcx return or can i just go ahead ran out of a send of the next gcx loop to the amp... i guess in simple terms... do i have to return the signal back to the switcher or will the signal still present a...
by toolshed
Mon Nov 22, 2010 6:56 pm
Forum: Racks, Switching Systems and MIDI
Topic: midi or din cable to 1/4 for amp switching .... help
Replies: 1
Views: 1043

midi or din cable to 1/4 for amp switching .... help

i have two amps that have a midi or din plug hookup.... i need to convert the cable to 1/4 to plug into the switcher.. anyone know where to find these cables or how did you solve this problem?