Search found 84 matches

by planethood
Thu Jul 19, 2012 7:15 pm
Forum: Racks, Switching Systems and MIDI
Topic: A/B/Y With GCX
Replies: 18
Views: 7828

A/B/Y With GCX

I know there is a way to use my GCX to A/B between two amps. However, what if I want to be able to run them both at the same time (Y) and also A/B between them? Can I do this with my GCX or do I need to buy something else to add to the GCX to accomplish this?
by planethood
Tue Feb 21, 2012 1:41 pm
Forum: Pedal Power®
Topic: Auxilary of PP AC used to power PP2+
Replies: 2
Views: 2130

Auxilary of PP AC used to power PP2+

Can I use the auxilary outlet on the Pedal Power AC to power the Pedal Power 2+?
by planethood
Fri Jan 06, 2012 1:45 pm
Forum: Racks, Switching Systems and MIDI
Topic: Phantom Power Liquid Foot Pro w/ Control Switcher & PP AC
Replies: 7
Views: 3246

Re: Phantom Power Liquid Foot Pro w/ Control Switcher & PP A

Yes, this would require a custom made cable where Pins 1 and 3 on the GCX end are wired to pins 6 and 7 on the Liquid Foot Pro end. I know of no stock cable that is wired like this.! So, I had the wiring correct that was listed above? All other pins correspond with eachother, right? Pins 1&3 would ...
by planethood
Tue Jan 03, 2012 2:41 pm
Forum: Racks, Switching Systems and MIDI
Topic: Phantom Power Liquid Foot Pro w/ Control Switcher & PP AC
Replies: 7
Views: 3246

Re: Phantom Power Liquid Foot Pro w/ Control Switcher & PP A

Thanks, John. I got an answer back from Jeff at LF and he said this, "Power on the Midi-out (of the LF) is pin 6 and 7. The top two pins. Pins 1 and 3 are used for MIDI in." So, with that being said I simply have to make or order a custom cable? Would the wiring look like this? Switcher (5 Pin Conne...
by planethood
Mon Jan 02, 2012 4:03 pm
Forum: Racks, Switching Systems and MIDI
Topic: Phantom Power Liquid Foot Pro w/ Control Switcher & PP AC
Replies: 7
Views: 3246

Phantom Power Liquid Foot Pro w/ Control Switcher & PP AC

Can I phantom power a Liquid Foot Pro footcontroller from the phantom out of the Control Switcher (that is being powered by a Pedal Power AC). The LFP draws 1000 ma. The CS draws 120ma. One of the outputs of the PPAC can send up to 1200 ma. Thus, it should work, right? If the power is okay, do I hav...
by planethood
Tue Dec 27, 2011 6:11 pm
Forum: Racks, Switching Systems and MIDI
Topic: Control Switcher Power Draw Requirements
Replies: 1
Views: 1192

Control Switcher Power Draw Requirements

How much power does the control switcher draw? I know the GCX draws around 500ma and so does the GCP. Right? I need a power supply that will power all three....
by planethood
Wed Dec 21, 2011 5:51 pm
Forum: Racks, Switching Systems and MIDI
Topic: Power Dunlop DCR2SR w/ Pedal Power AC?
Replies: 1
Views: 1228

Power Dunlop DCR2SR w/ Pedal Power AC?

Can I power the Dunlop DCR-2SR rackmount wah with the Pedal Power AC? The wah requires 24 v @ 100ma. I am hoping to combine two of the 12 volt power sections with a special cable from you guys to do this....
by planethood
Wed Dec 14, 2011 11:16 am
Forum: Racks, Switching Systems and MIDI
Topic: GCX on What Midi Channel?
Replies: 2
Views: 1524

Re: GCX on What Midi Channel?

Thanks John!
by planethood
Wed Dec 14, 2011 8:33 am
Forum: Racks, Switching Systems and MIDI
Topic: GCX on What Midi Channel?
Replies: 2
Views: 1524

GCX on What Midi Channel?

If I use a different midi controller than the GCP to controll the GCX, how do I set it up? Does each loop on the GCX respond to a different CC? Does the GCX work on midi channel 1?
by planethood
Mon Dec 05, 2011 3:28 pm
Forum: Racks, Switching Systems and MIDI
Topic: GCX Quits Responding. Why?
Replies: 4
Views: 1717

Re: GCX Quits Responding. Why?

JohnClark wrote:As a test, can you try running the GCX before the Control Switcher in the MIDI path?
Will do. I will get back with the results ASAP.