Search found 7348 matches

by JohnClark
Tue Oct 01, 2019 11:16 am
Forum: Pedal Power®
Topic: Powering tc helicon voicelive play w/ pedal power 2 plus
Replies: 1
Views: 179

Re: Powering tc helicon voicelive play w/ pedal power 2 plus

You should be completely fine to power this way from the Pedal Power 2+.

I hope that helps!
by JohnClark
Tue Oct 01, 2019 11:14 am
Forum: Racks, Switching Systems and MIDI
Topic: Pedal Switcher controlled by midi
Replies: 5
Views: 347

Re: Pedal Switcher controlled by midi

where can I get the firmware to enable program changes? thanks Olly For what device? As I mentioned above the Pedal Switcher does NOT respond to Program Changes, but there is an alternate firmware to force it to respond to Control Change messages if you cannot send the SysEx message that accomplish...
by JohnClark
Tue Oct 01, 2019 10:55 am
Forum: Racks, Switching Systems and MIDI
Topic: PX-8 Plus programming issues
Replies: 1
Views: 94

Re: PX-8 Plus programming issues

No problem! When using a switching system, all pedals connected to the loops will be left on at all times. The switcher will either insert the effect into the signal path or remove it completely by activating or bypassing the loops. Here is how I like to get started programming or editing my presets...
by JohnClark
Tue Oct 01, 2019 10:07 am
Forum: Pedal Power®
Topic: Which power supply should I get?
Replies: 1
Views: 102

Re: Which power supply should I get?

Hello and welcome to the forum! A Pedal Power 2+ would work well for this setup. The MXR M234, M228, and M101 as well as the TC HOF 2 can each be powered from any output on a Pedal Power 2+ with the corresponding DIP switches set to Normal. The Deluxe Memory Man 1100-TT needs more current than the o...
by JohnClark
Mon Sep 30, 2019 3:21 pm
Forum: Racks, Switching Systems and MIDI
Topic: GCP "FROZEN"
Replies: 5
Views: 191

Re: GCP "FROZEN"

Ahh... yes that is a bit far for shipping.

You should give our Australian Distributor, EGM Distribution a call. They should be able to provide you some more localized help.

Be sure to let them know I sent you.
by JohnClark
Mon Sep 30, 2019 11:11 am
Forum: Pedalboards and Effects
Topic: Pedal Switcher power supply: specs
Replies: 1
Views: 202

Re: Pedal Switcher power supply: specs

The power supply that shipped with the original 4 button Pedal Switcher was 9VAC @500mA with a 2.5mm Barrel plug. However, the Pedal Switcher will accept 9V AC OR 12V DC and draws less than 200mA. We do still have stock of the original power supply (its the same power supply that ships with a Ground...
by JohnClark
Mon Sep 30, 2019 11:06 am
Forum: Racks, Switching Systems and MIDI
Topic: GCP "FROZEN"
Replies: 5
Views: 191

Re: GCP "FROZEN"

That is odd... how are you powering your Ground Control Pro? If not from the original included power supply, make sure to use one that is 9V (AC or DC) with at least a 500mA capacity. Barring that, I'd say we may as well get it in here to take a look. Please give us a call or write to info@voodoolab...
by JohnClark
Fri Sep 27, 2019 10:11 am
Forum: Racks, Switching Systems and MIDI
Topic: Ground Control Pro + Eleven Rack Expansion Pack
Replies: 59
Views: 82725

Re: Ground Control Pro + Eleven Rack Expansion Pack

I am new to this Forum and not very computer savvy. I just purchased a Voodoo Ground control for my Eleven Rack. I am not able to get the two to see each other. I tried the voodoo instruction manual but no success. I looked at you-tube but no success what am I doing wrong. cannot get the two to see...
by JohnClark
Thu Sep 26, 2019 1:53 pm
Forum: Pedalboards and Effects
Topic: Warranty on line?
Replies: 8
Views: 799

Re: Warranty on line?

For Hook and Loop (Velcro) I like to put the soft side (the Loop) on the board and the rough side (the Hook) on the pedals. My main reason for this is that I like to still sometimes just goof with pedals on the floor and the hook side will keep pedals from moving around on carpet. Now the mention of...
by JohnClark
Thu Sep 26, 2019 1:02 pm
Forum: Racks, Switching Systems and MIDI
Topic: 2 GCX units with RJM mastermind gt22
Replies: 1
Views: 135

Re: 2 GCX units with RJM mastermind gt22

In order to get two (or more) GCX units to work from the Mastermind controller you will first need to program the Mastermind to send the following MIDI System Exclusive string... F0 00 00 07 01 08 10 F7 This tells each GCX in the MIDI path what position it is in which in turn makes each GCX listen o...