Search found 7494 matches

by JohnClark
Mon Dec 21, 2020 4:20 pm
Forum: Racks, Switching Systems and MIDI
Topic: GCP Web Editor
Replies: 22
Views: 25194

Re: GCP Web Editor

I'm getting the invalid syx error when I try to upload the file to gcproeditor.com. It worked fine last week but now I'm getting error, not sure if the problem lies w/ the site or the file. I've tried Chrome and Safari Any ideas? Send us a copy of your file and we will see if we can make it work......
by JohnClark
Mon Dec 21, 2020 4:17 pm
Forum: Racks, Switching Systems and MIDI
Topic: PX-8 Plus with TC Electronic Plethora
Replies: 2
Views: 1965

Re: PX-8 Plus with TC Electronic Plethora

I've not found anything that documents what MIDI Messages the Plethora responds to. :oops:

But I can tell you that the PX-8 Plus will send MIDI Program Change messages 1-36 on MIDI Channel 1... maybe there is a manual with the Plethora that states the MIDI specs?
by JohnClark
Fri Aug 21, 2020 2:45 pm
Forum: Racks, Switching Systems and MIDI
Topic: MIDI Out Not Working Help...
Replies: 3
Views: 3888

Re: MIDI Out Not Working Help...

HMM... PX-8 Plus should always be sending Program Changes on MIDI Channel 1 with each preset, this is always on and cannot be changed. Do you have any other MIDI source to send to one of your pedals to ensure tey are responding on MIDI Channel 1?
by JohnClark
Fri Aug 21, 2020 2:36 pm
Forum: Racks, Switching Systems and MIDI
Topic: Rig Help (cc messages)
Replies: 3
Views: 2807

Re: Rig Help (cc messages)

Your Volante and Amp1 need to be set to receive on unique MIDI Channels. It looks like the Amp1 might be fixed at using MIDI Channel 1 so I'd look to changing the MIDI Receive Channel on the Volante to Channel 2. In the Ground Control Pro you will name each device and assign it the same MIDI Channel...
by JohnClark
Fri Aug 21, 2020 2:20 pm
Forum: Racks, Switching Systems and MIDI
Topic: GCX not communicating with GCP, no cable fault
Replies: 2
Views: 2459

Re: GCX not communicating with GCP, no cable fault

If the GCX does not scroll the LEDs when first powered on then something is certainly wrong with this GCX. Test with the GCX powered off for at least 10 seconde, then power up... if it still does nothing at all then please feel free to give us a call or write to info@voodoolab.com to arrange for an ...
by JohnClark
Wed Jun 03, 2020 10:52 am
Forum: Racks, Switching Systems and MIDI
Topic: Control Switcher help!
Replies: 11
Views: 7961

Re: Control Switcher help!

Ahh the plot thickens! I thought you had only the two Control Switchers going here. Lets start fresh... First, what are all the Voodoo Lab / Digital Music Corp. controllers and Switcher that will be in this rig? Also, what will be your preferred MIDI Cable connection path? So far I believe you have ...
by JohnClark
Tue Jun 02, 2020 10:49 am
Forum: Racks, Switching Systems and MIDI
Topic: Control Switcher help!
Replies: 11
Views: 7961

Re: Control Switcher help!

When mimicking a GCX, this will take one of the four available GCX locations in the Ground Control Pro.

Here is a link to the red button Control Switcher Manual... Control Switcher v2 (Red Buttons)

Let us know if you run into any troubles!
by JohnClark
Tue Jun 02, 2020 10:01 am
Forum: Racks, Switching Systems and MIDI
Topic: Control Switcher help!
Replies: 11
Views: 7961

Re: Control Switcher help!

No problem to control two Control Switchers as a single GCX. The basic steps from factory fresh are as follows... 1. Set both Control Switchers to receive on MIDI Channel 16. 2. Set both Control Switchers to Enable Control Change messages. 3. On Control Switcher #1, set to respond to Control Change ...
by JohnClark
Wed Apr 01, 2020 10:30 am
Forum: Racks, Switching Systems and MIDI
Topic: GCP and BOSS FV-500L
Replies: 3
Views: 4424

Re: GCP and BOSS FV-500L

The main problem of not being able to reach the full data value of 127 is because the 10K potentiometers are a bit too low for the Ground Control Pro and together they are pulling the reference voltage for the expression pedals circuit down too low. You can modify the Ground control Pro to accept th...
by JohnClark
Wed Apr 01, 2020 10:10 am
Forum: Racks, Switching Systems and MIDI
Topic: GCX LOOPS AND RJM PBC10
Replies: 1
Views: 3326

Re: GCX LOOPS AND RJM PBC10

Unless the GCX is modified to have Stereo Loops, all the loops will be Mono. For your setup you will likely just use two Loops for each Stereo Device you want to switch. I'll use GCX Loops 7 and 8 for an example, but you can use any two GCX Loops you want for the Intellifex: 1. PBC Left Output to GC...