New Pedalboard: PX-8, Mondo, Giggity & Sparkle Drive Mod

Share pictures of your racks and pedalboards featuring Voodoo Lab products.
Post Reply
stilwel
Posts: 39
Joined: Thu Jun 04, 2009 9:34 am
Location: Phoenix

New Pedalboard: PX-8, Mondo, Giggity & Sparkle Drive Mod

Post by stilwel » Thu Mar 05, 2015 9:30 am

I still have to replace a few of the colorful patch cables. I ran out of George L's right-angle plugs. I also need to solder up 2 custom MIDI cables using the Switchcraft Right-Angle plugs.

All of this (including the M9 and H9) are being powered by a PP-Mondo.

Image


My custom pedalboard panel arrived yesterday. I'm using the Redco locking 1/4" pass-thru jacks. Still waiting for my MIDI pass-thru from Temple Audio.

Image

Image

Installed on my PT-3.
Image

That's a Pedal Power MONDO on the right side.
Image
Image
Last edited by stilwel on Tue Apr 07, 2015 11:38 am, edited 1 time in total.

modulo
Posts: 21
Joined: Fri Jan 02, 2015 5:33 pm
Location: Montreal, Canada

Re: New Pedalboard build with PX-8, Mondo and Sparkle Drive

Post by modulo » Thu Mar 05, 2015 3:31 pm

nice rig!

where did you get the backplate and ¼ inch plug??


Pascal
Marshall JVM 210H 100w
1960a cab with G12T75 and Vintage 30's
Fractal Audio AX8

Guitars:
IBANEZ JEM PMC
IBANEZ JEMjr Desert Yellow
EVH Wolfgang Vintage white

stilwel
Posts: 39
Joined: Thu Jun 04, 2009 9:34 am
Location: Phoenix

Re: New Pedalboard build with PX-8, Mondo and Sparkle Drive

Post by stilwel » Thu Mar 05, 2015 5:25 pm

I designed the plate and had it fabricated.

The 1/4" pass-thru plugs are from Redco.

http://www.redco.com/Redco-PM-TRS-TRS.html

modulo
Posts: 21
Joined: Fri Jan 02, 2015 5:33 pm
Location: Montreal, Canada

Re: New Pedalboard build with PX-8, Mondo and Sparkle Drive

Post by modulo » Thu Mar 05, 2015 6:33 pm

do you have one to sell?
Marshall JVM 210H 100w
1960a cab with G12T75 and Vintage 30's
Fractal Audio AX8

Guitars:
IBANEZ JEM PMC
IBANEZ JEMjr Desert Yellow
EVH Wolfgang Vintage white

Corygaff
Posts: 3
Joined: Sat Mar 14, 2015 3:31 pm

Re: New Pedalboard build with PX-8, Mondo and Sparkle Drive

Post by Corygaff » Mon Apr 06, 2015 3:49 am

Hey man! Really need your help, have you powered a line 6 m9 by using a voodoo lab 4x4 using the current double adapter? does it work?

stilwel
Posts: 39
Joined: Thu Jun 04, 2009 9:34 am
Location: Phoenix

Re: New Pedalboard build with PX-8, Mondo and Sparkle Drive

Post by stilwel » Tue Apr 07, 2015 11:35 am

Corygaff wrote:Hey man! Really need your help, have you powered a line 6 m9 by using a voodoo lab 4x4 using the current double adapter? does it work?
I'm using a Mondo, but you should be able to do the same with the 4x4.

I use the current doubling cable connected to both 12Vdc 400mA outputs and it works GREAT with the M9.

http://www.voodoolab.com/shop/index.php ... hi8ed25qi3

Image

stilwel
Posts: 39
Joined: Thu Jun 04, 2009 9:34 am
Location: Phoenix

Re: New Pedalboard build with PX-8, Mondo and Sparkle Drive

Post by stilwel » Tue Apr 07, 2015 11:37 am

Done. I finally got all of my Right-Angle MIDI plugs yesterday and finished wiring it up this morning. Labels on PX-8 show the actual signal path.

A couple changes since the last pics:

Giggity - makes a fantastic base tone on which to layer Fuzz boxes.

Tech 21 MIDI Mouse - Super-basic MIDI pedal to select presets on the PX-8, M9 and H9. One stomp and the entire board is reconfigured. The MM is phantom powered by the PX-8.

FF Mini (Silicon) - Great sound in a small package. This will will rotated out occasionally for my Tweak Fuzz.

Fender FWP-1 Wah - First in the signal path and basically a Crybaby, but with an internally switchable output buffer so it plays nice with my Fuzz Pedals. I've modded this to have a 6-way frequency range switch and toe frequency pot (similar to the Dunlop AIC wah). See pic below.


Image

Image

Image

Post Reply