TeTech 21 Boost Fuzz - Help!

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
Posts: 1
Joined: Thu Sep 27, 2018 4:25 pm

TeTech 21 Boost Fuzz - Help!

Post by Jackknife » Tue Oct 09, 2018 2:58 pm

I have a Tech 21 Boost Fuzz pedal. The manual for the pedal says 100mA minimum. I have the Pedal Power Plus 2 power unit and jacks 1-4 and 7-8 are rated at 100 mA maximum. You think I’d be ok powering this pedal from the 100mA Max jacks? Or should I run it from the 5 or 6 jack at 250mA? Would that damage the pedal runnin it at 250mA? Thanks

Posts: 322
Joined: Thu Sep 01, 2011 10:31 am

Re: TeTech 21 Boost Fuzz - Help!

Post by Rez » Wed Oct 10, 2018 11:44 am

Either way should work equally well (via the standard capacity 100mA or high capacity 250mA).

To power the Tech 21 Boost Fuzz use any 9VDC output with one of the all black (standard polarity) cables supplied.

Ben Resnick
Voodoo Lab - Tech Support

Post Reply