Effectrode, Mini Vent, Chrono Delay

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
helletused
Posts: 3
Joined: Sat Oct 28, 2017 3:42 am

Effectrode, Mini Vent, Chrono Delay

Post by helletused » Mon Mar 18, 2019 8:01 am

Hello, does the mondo power all those pedals?
PC-2A 12V 600mA
Mini Vent 12V 180mA
Providence Chrono Delay 12V 110mA

the mondo outputs 5-6 with dip switches on give unregulated 12-16V 250mA. Do the mini vent and chrono delay survive this?

Thank You,
best wishes, Paul

Rez
Posts: 340
Joined: Thu Sep 01, 2011 10:31 am

Re: Effectrode, Mini Vent, Chrono Delay

Post by Rez » Mon Mar 18, 2019 11:01 am

Yes, Pedal Power Mondo will power them all, setup:

To power the PC-2A Compressor use a 12VDC high current capacity (400mA) output with a 2.1mm Reverse Polarity Barrel Cable, part# PPREV, PPREV-R. Note, the actual current draw of PC-2A is less than 400mA.

To power the Mini Vent use the Mondo output labeled 5 or 6, DIP switch in the 12V mode (set away from NORMAL) with a 2.1mm Reverse Polarity Barrel Cable, part# PPREV, PPREV-R

To power the Chrono Delay use a 12VDC high current capacity (400mA) output with one of the all black (standard polarity) cables supplied.


Cheers!
Cheers,
Ben Resnick
Voodoo Lab - Tech Support

helletused
Posts: 3
Joined: Sat Oct 28, 2017 3:42 am

Re: Effectrode, Mini Vent, Chrono Delay

Post by helletused » Tue Mar 19, 2019 1:02 am

Yes, it works! Thanks, Paul

Rez
Posts: 340
Joined: Thu Sep 01, 2011 10:31 am

Re: Effectrode, Mini Vent, Chrono Delay

Post by Rez » Thu Mar 21, 2019 2:20 pm

Awesome!

;)
Cheers,
Ben Resnick
Voodoo Lab - Tech Support

Post Reply