connecting 2 wireless units to pp2

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
Ken R
Posts: 1
Joined: Tue Apr 25, 2017 5:14 pm

connecting 2 wireless units to pp2

Post by Ken R » Tue Apr 25, 2017 5:29 pm

Can I connect a Shure PGX4 wireless mic unit 12-18V 160mA and an Audio Technica ATW-R1100 wireless guitar unit DC 12V 500mA to the PP2 plus? If so, how do I do that. I'm assuming that I can use a doubler cable on ports 5 and 6 and change the dips for the Shure and just plug the AT into the AC outlet on the back? Could someone confirm that?

Posts: 7261
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: connecting 2 wireless units to pp2

Post by JohnClark » Thu Apr 27, 2017 8:54 am

The Shure receiver can be powered from output 5 or 6 with the corresponding DIP switch set away from Normal, no doubler cable is needed for this one.

I have been searching for accurate information on the actual current draw for the Audio Technica receiver but so far have come up empty handed :oops:
For now, yes I would suggest running it with its included power adapter connected to the Courtesy Outlet on the back of the Pedal Power 2+.

I hope that helps!

Post Reply