I have the original pedal power 2 (not a plus) and I want to power a Strymon Mobius. I have a doubler that was running my MXR EVH Flanger that required 18V. Is there a different cable for current doubling or are they the same? I found a cable on eBay and it says it does both (current or voltage doubling). See link: http://m.ebay.com/itm/282123340082
How does the pedal power 2 know how to increase either voltage or current? Does the the pedal just draw what it needs?
The Mobius needs 300mA so can I safely use the doubler in outputs 4 and 6 with output 6 set away from normal (for 200mA) to get a total of 300mA? Will the combination of 9V and 12V (21V) damage the pedal or will the pedal just draw the 9V required?
Please help. I don't want to fry my expensive Mobius.
There is no cable that does both... There is one cable for Doubling the Voltage and one cable for Doubling the Current.
The Current Doubler Adapter
(the one with the Green end) will only combine the Current of the two Outputs used. And both Outputs would need to be set to the same Voltage.
However, in your case this still won't help much since the Mobius requires more current than is available. For the Mobius you will need to use the included power adapter connected to the Courtesy Outlet on your older model Pedal Power 2.
I hope that helps!