Pedal Power 4x4 and Zoom B3?

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
botched
Posts: 2
Joined: Tue Feb 05, 2013 12:50 pm

Pedal Power 4x4 and Zoom B3?

Post by botched » Tue Feb 05, 2013 12:53 pm

Greetings. Setting up my new pedal board with a pedal power 4x4.

I'd like to include a zoom B3 with draws 9V-500mA.

Is there any way to do this?

Thanks!

Gustaf

JulianShur
Posts: 187
Joined: Sat Dec 08, 2012 1:27 pm
Location: Irvine, CA

Re: Pedal Power 4x4 and Zoom B3?

Post by JulianShur » Tue Feb 05, 2013 9:04 pm

Judging by the 6-hour battery life noted in the specifications, I'd have to say that the B3 will require the use of a Current Doubler cable connected to a 9V/400mA output and a 9V/100mA output on a 4x4.
Julian Shur
Pedal Junkie/Amateur Circuit Barber

botched
Posts: 2
Joined: Tue Feb 05, 2013 12:50 pm

Re: Pedal Power 4x4 and Zoom B3?

Post by botched » Wed Feb 06, 2013 3:04 pm

Thanks! I was hoping the solution would be a simple as that. Current doubling adapter is on its way... so I'll let you know! Thanks again.

Post Reply