Strymon DiG, DD500 & TC X2 looper

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
Python
Posts: 7
Joined: Sun May 01, 2016 9:28 am

Strymon DiG, DD500 & TC X2 looper

Post by Python » Sun May 01, 2016 9:34 am

Hi, sorry if this was answered before, but for the Pedal Power 2 Plus, am I correct in using the DD500 (200mA) in jack 5 and Dig (250mA) in jack 6 and x2 looper (100mA) in jacks 1-4, all set to normal? I just want to ensure there is enough current that way to go around, especially when other pedals are plugged into 1-4 (Rv6, EGO Comp, Pitchfork).

JohnClark
Posts: 7459
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Strymon DiG, DD500 & TC X2 looper

Post by JohnClark » Tue May 03, 2016 9:48 am

You got it!

The RV-6, Ego Compressor, Pitchfork (EHX or Nady), and Ditto X2 can each be powered from any output with the corresponding DIP switch set to Normal.
The DD-500 and DIG can each be powered from output 5 or 6 with the corresponding DIP switch set to Normal.
So a Pedal Power 2+ will power all your pedals at once and even have two outputs left over for a guitar players favorite thing... more pedals!
------------------====Cheers!====------------------
Image
---------==Voodoo Lab Magician & Tech==---------

Python
Posts: 7
Joined: Sun May 01, 2016 9:28 am

Re: Strymon DiG, DD500 & TC X2 looper

Post by Python » Sat May 07, 2016 9:52 pm

Thanks much!

Post Reply