PP+2 with Boss RC300 and ME80

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
Posts: 1
Joined: Sat Apr 15, 2017 3:57 am

PP+2 with Boss RC300 and ME80

Post by Off-World » Sat Apr 15, 2017 4:11 am

Hi all, I'm wondering if it is possible to run both the Boss RC300 loopstation and the Boss ME80 multi effects plus a few other small 9v pedals off of a Pedal Power Plus 2 and iff so what would be the best way to go about it?
The RC300 currently uses the Uk PSA 230Es and Ive seen it recommended for the ME80 too.
Thanks for your help.

Posts: 7183
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: PP+2 with Boss RC300 and ME80

Post by JohnClark » Mon Apr 17, 2017 10:30 am

You can power both, but the RC-300 will need a Current Doubler Adapter (the one with the Green end) connected to output 5 or 6 and any other output with both corresponding DIP switches set to Normal.

The ME-80 can be powered directly from output 5 or 6 with the corresponding DIP switch set to Normal.

I hope that helps!

Post Reply