It is currently Sun Jul 22, 2018 7:13 pm

All times are UTC - 8 hours [ DST ]





Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Daisy Chain 9v pedals with Pedal Power +2
PostPosted: Wed Mar 28, 2018 5:53 pm 
Offline

Joined: Mon Mar 26, 2018 7:17 pm
Posts: 1
Sorry if this is a repeat question, but I could not find an answer in the forum.

My son bought me a Pedal Power +2 as gift a couple years ago. I had a few pedals then now I'm up to 11

Is possible to daisy chain 2 9v pedals or do I need to buy another power supply?

Pedals:
TC Electronic Polytune2 Tuner - 40mA - 9V
EVH Wah - 2mA - 9V
TC Electronic Spark - 40mA - 9V
Behringer Compressor/Sustainer CS400 - 30mA - 9V
Delta Lab Tube Overdrive - ?? - 9V
TC Electronic Afterglow Chorus - 100mA - 9V
EVH MXR 90 Phaser - 8.2 mA - 9V
EVH MXR Flanger - 35mA - 18V
Boss Acoustic Simulator AC-3 - 45mA - 9V
Boss Digital Delay DD-7 - 55mA - 9V

Boss Loop Station AC-3 - 70mA - 9V
Plan on using a separate power supply so can hook up to acoustic rig.

Thanks for any help.


Top
 Profile  
 
 Post subject: Re: Daisy Chain 9v pedals with Pedal Power +2
PostPosted: Tue Apr 03, 2018 2:45 pm 
Offline

Joined: Tue May 05, 2009 2:33 pm
Posts: 7012
Location: The Lab
You can use a couple of our Output Splitter Adapters to double up pedals on a single output.

You may need to experiment with pedal pairs that work well together, but if you make sure the combined current draw of the paired pedals does not exceed the capability of the output you use it should all be fine.

I hope that helps!


Top
 Profile  
 
 Post subject: Re: Daisy Chain 9v pedals with Pedal Power +2
PostPosted: Thu Jun 28, 2018 6:40 am 
Offline

Joined: Thu Jun 28, 2018 6:28 am
Posts: 1
JohnClark wrote:
You can use a couple of our Output Splitter Adapters to double up pedals on a single output.

You may need to experiment with pedal pairs that work well together, but if you make sure the combined current draw of the paired pedals does not exceed the capability of the output you use it should all be fine.

I hope that helps!




Hi,

I bought the splitter cable, however when only one of the females work. More over, when I plug in both pedals none of them work.

The pedals are an Analogman Chorus, and a TC Electronic Hypergravity. I have also tried to plug in my Shure Tuner/Wireless receiver with the same result.

I hope you can help me.


Top
 Profile  
 
 Post subject: Re: Daisy Chain 9v pedals with Pedal Power +2
PostPosted: Thu Jun 28, 2018 1:51 pm 
Offline

Joined: Thu Sep 01, 2011 10:31 am
Posts: 156
In order for the effect pedal powered from the output splitter adapter lead with the white stripe (ground lifted) to work, it needs to be also connected with the other effect pedals (including the effect pedal powered from the all-black splitter lead) via the guitar/instrument cables.

Until the instrument/guitar cables are connected as such, the effect pedal on the lead with the white stripe will not work.

This design is used intentionally to avoid contributing ground-loop noise.


;)

_________________
Cheers,
Ben Resnick
Voodoo Lab - Tech Support


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


cron