surfybear metal and pp2+

Exchange tips and tricks to help you design the ultimate pedalboard.
Post Reply
tabletop
Posts: 6
Joined: Sun Feb 24, 2019 6:27 am

surfybear metal and pp2+

Post by tabletop » Mon Jul 20, 2020 8:35 am

Can I power a Surfybear Metal reverb pedal with my PP2+?

The Surfybear pedal comes with a 12v 1000ma centre positive power supply but apparently the pedal only needs 500ma.

Can I get 500ma at 12v from output 5&6 if I use a current doubling cable?...it says in the manual that each channel delivers 250ma.

P.s. I have been running an Effectrode compressor by doubling the current in outputs 5&6 and it says it is 12v 600ma. So in theory this should work right?

cheers

Marlboro05
Posts: 151
Joined: Mon Sep 07, 2015 12:46 pm
Location: Australia

Re: surfybear metal and pp2+

Post by Marlboro05 » Sun Aug 30, 2020 7:38 pm

Hi there,
For the centre positive you’ll need the special cable found here

http://www.voodoolab.com/shop/index.php?cPath=22

Or modify one yourself.

I’d try 5 or 6 with the dip switch away and see if it powers both the Surfybear and Effectrode with just 1 port, if it doesn’t it will just cut out. If it does cut out, try 2 of the ports 1-4 on the Effector and port 5 and 6 for the Surfybear.

See how you go

Cheers
GCPro, GCX, Pedal Power 2+, Pedal Power AC.
And some other stuff.

Post Reply