Choosing a Voodoo Lab Pedal Power model for my board

Exchange tips and tricks to help you design the ultimate pedalboard.
Post Reply
BeardGuitar
Posts: 1
Joined: Sun Feb 21, 2016 7:32 pm

Choosing a Voodoo Lab Pedal Power model for my board

Post by BeardGuitar » Sun Feb 21, 2016 8:32 pm

I have a Pedaltrain Terra with the following effects:

1. Boss GT-100
2. Shure GLXD16
3. TC Helicon Mic Mechanic
4. TC Helicon Harmony Singer
5. Digitech Whammy DT
6. Boss TE 2 tera echo
7. Jimi Hendrix Wah JH-1

Which Pedal Power model should I get and what advice for hooking it up?

JohnClark
Posts: 7077
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Choosing a Voodoo Lab Pedal Power model for my board

Post by JohnClark » Tue Feb 23, 2016 6:39 pm

I would probably go with the Pedal Power 4x4 for this setup. The only thing left out would be the GT-100 since requires 600mA.

The two TC Helicon pedals will use the two High Current 12V Outputs on the left.
The TE-2 and JH-1 can each be powered from any of the 9V outputs in the middle.
The Shure reciever and the Whammy DT can each be powered from either of the High Current 9V Outputs on the right.

I hope that helps!

Post Reply