Voodoo Lab
http://voodoolab.com/forum/

Adding PX-8 to Medium Dingbat
http://voodoolab.com/forum/viewtopic.php?f=8&t=8594
Page 1 of 1

Author:  ShaneG [ Sat Nov 11, 2017 7:48 pm ]
Post subject:  Adding PX-8 to Medium Dingbat

I have a medium Dingbat board with the 4x4 power supply. Can I attach the PX-8 switching system to my existing medium Dingbat board? I see that the width is the same as the Dingbat PX-8 and it looks like it is attached with a bracket. Thanks in advance and I apologize if this has been asked before.

Author:  JohnClark [ Mon Nov 13, 2017 11:57 am ]
Post subject:  Re: Adding PX-8 to Medium Dingbat

The Dingbat PX is made to have the PX-8 or PX-8+ mounted underneath the front edge of the pedalboard.
The Dingbat Medium is the same size but with its closed in front edge, a PX-8 or PX-8+ would mount on top like any of the pedals.

I hope that helps!

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/