Voodoo Lab
http://voodoolab.com/forum/

Setting up GCP and Eleven Rack to match
http://voodoolab.com/forum/viewtopic.php?f=8&t=8633
Page 1 of 1

Author:  The Guitar Grandpa [ Mon Nov 27, 2017 2:59 pm ]
Post subject:  Setting up GCP and Eleven Rack to match

For anyone that is interested in updating their Ground Control Pro to match the Eleven Rack here's how to do it for Mac.
Get the Memory Dump File here:
viewtopic.php?f=9&t=2688
Get SysEx Librarian here:
https://www.macupdate.com/app/mac/28692/sysex-librarian
Open The Following Web Page:
https://gcproeditor.com
1st: upload the 11RXP_GCP113.syx file onto your Ground Control using the SysEx Librarian. either thru a Midi transfer device/cable or thru an audio interface like I did from my Presonus AudioBox iTwo using the instructions from the memory dump file link above.
2nd: Drop the .syx file in the location it shows on the (GCPro Editor above) web page. Once it loads go to each rig/bank you have changed from the original and rename them and add the Instant Access pedals for each rig.
3: Once you have them all done download the syx file and redo the upload to your GCP like you did first.
It's a whole lot easier than trying to manually change each rig on the GCP.

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/