Dingbat PX and replacing Switcher

Exchange tips and tricks to help you design the ultimate pedalboard.
Post Reply
Posts: 1
Joined: Thu Nov 22, 2018 6:31 am

Dingbat PX and replacing Switcher

Post by StratMann » Thu Nov 22, 2018 6:38 am

is the integrated PX-8 plus switcher in the Dingbat PX board the same as the regular PX-8 plus? For example, if the Switcher in my Dingbat PX has issues am I able to buy a new PX-8 plus and screw it under the front of the board? Do I need longer screws for mounting the PX-8 plus under the Dingbat PX? Thanks.

Posts: 7469
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Dingbat PX and replacing Switcher

Post by JohnClark » Mon Nov 26, 2018 11:48 am

It is the very same PX=8 Plus in both cases, yes.

When mounted to a Dingbat PX, we do indeed use slightly longer screws. (1/4" on standalone PX-8 Plus. 3/8" on Dingbat PX)

However, in your replacement scenario, you would already have the longer screws since they would be on the unit mounted to the Dingbat PX. ;)

I hope that helps!
---------==Voodoo Lab Magician & Tech==---------

Post Reply