Control switcher

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
andyp
Posts: 1
Joined: Sat Mar 06, 2021 11:14 am

Control switcher

Post by andyp » Sat Mar 06, 2021 11:26 am

I am using a Cymatic UTrack24 which is a unit to play back clicktracks. On the front it has a footswitch Jack input to be able to play/stop. I would like to control this from a dedicated switch on my RJM MIDI foot controller (from MIDI chan 3 or 4). Would the Voodolab Control Switcher enable me to do this or does it only work with amps

JohnClark
Posts: 7494
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Control switcher

Post by JohnClark » Tue Mar 09, 2021 3:30 pm

Sorry for the delay on getting this post approved! :oops:

The Control Switcher should be able to control just about anything that uses a simple 1/4" footswitch, not just guitar amplifiers.
The MIDI Receive channel is programmable and it can respond to Program Changes and/or Control Changes.

I hope this helps!
------------------====Cheers!====------------------
Image
---------==Voodoo Lab Magician & Tech==---------

Post Reply