load rigs in Eleven Rack

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
spaige
Posts: 2
Joined: Wed Feb 16, 2011 6:55 am

load rigs in Eleven Rack

Post by spaige » Wed Feb 16, 2011 6:37 pm

I'm new to eleven rack and would just like to load some rigs to THE GROUND CONTROL. Are their any step by step directions that can simplify this. I know the firmware is coming out but this is a foreign language to me . Thanks Scott

JohnClark
Posts: 7453
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: load rigs in Eleven Rack

Post by JohnClark » Thu Feb 17, 2011 12:29 pm

If the Ground Control Pro presets are already recalling the patches on Eleven Rack then all that is left to do is program your Ground Control Pro presets so they recall the patches you want and name them.
The Assigning MIDI Program Changes section of the Ground Control Pro manual under Edit Preset shows how to make the Ground Control Pro presets send the appropriate number that recalls the patch you want on your processor.
The Naming Presets section of the Ground Control Pro manual under Edit Preset shows you how to enter the name you want displayed on the Ground Control Pro screen whenever you recall a preset.

Try that out and let us know if you get stuck.

I hope that helps!
------------------====Cheers!====------------------
Image
---------==Voodoo Lab Magician & Tech==---------

Post Reply