Control switcher help

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
Posts: 24
Joined: Tue Apr 13, 2010 9:30 pm

Control switcher help

Post by blksolo » Thu Dec 11, 2014 9:12 pm

I have a control switcher that I modified to use phantom power from the GCX with instructions from Voodoo Lab,I believe I moved a jumper. I'm getting ready to sell it and need to revert it back to factory,how do I do this? Thanks

Posts: 1375
Joined: Mon Jan 25, 2010 8:53 am

Re: Control switcher help

Post by nyteowl » Sun Dec 14, 2014 9:32 am

According to the Voodoo Lab web site, a new Control Switcher right out of the box can be...

Phantom powered by GCX or Pedal Switcher via MIDI cable" while I'm not sure what mod you may have done, if your Control Switcher is accepting Phantom Power from your GCX it's already at factory specs.

What's interesting, though, is that the manual doesn't say anything about powering it via phantom power, but it does say the Control Switcher can provide phantom power to a GCPro via the MIDI Cable.
I am not affiliated with Voodoo Lab in any way, but enjoy sharing what little MIDI and signal routing knowledge I've picked up over the years. If you find my assistance helpful, please pay it forward.

Post Reply