Ground Control Pro latest version

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
blueherdim
Posts: 2
Joined: Sat Oct 03, 2009 8:28 pm

Ground Control Pro latest version

Post by blueherdim » Sat Oct 03, 2009 8:34 pm

I have an older GCP and was just curious. When it powers up, it shows the version as 1.11. What is the latest version and what would I gain by upgrading to the latest firmware? Also, is an upgrade just an eprom swap?

Thanks.

Jon

JohnClark
Posts: 7459
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Ground Control Pro latest version

Post by JohnClark » Tue Oct 06, 2009 4:37 pm

There is no real difference in the Ground Control pro software from v1.10 to v1.13 (1.13 being the current shipping version as of this comment) . Are you having trouble controlling a specific piece of gear? Updates are in the form of a replacement eprom.


Also... http://www.voodoolab.com/forum/viewtopic.php?f=9&t=606
------------------====Cheers!====------------------
Image
---------==Voodoo Lab Magician & Tech==---------

blueherdim
Posts: 2
Joined: Sat Oct 03, 2009 8:28 pm

Re: Ground Control Pro latest version

Post by blueherdim » Tue Oct 06, 2009 4:49 pm

Thanks, John. Nope, no problems. I've had it for about 4 years and was just curious really. Great piece of gear.

Post Reply