Adding a 5th switcher

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
THJO
Posts: 1
Joined: Sun May 21, 2017 3:34 am

Adding a 5th switcher

Post by THJO » Sun May 21, 2017 3:47 am

My stereo guitar rig include 2 parallel Voodoo Lab HEX audio switcher for time based effect. The stereo signal are send into the effect loops of my two Marshall amplifiers. It also include 2 serial Voodoo Lab HEX audio switchers split in front of the 2 amps for overdrive, booster, compressor etc. All switchers are controlled by Voodoo Lab Ground control pro. Now I would like like to add a Voodoo Lab Control switcher to manage channel switching of both amps simultaneously, meaning a 5th voodoo lab midi device. How is that possible since Ground control pro only recognize and controls up to 4 GCX/HEX/Control Switchers? Kindly regard Thomas

JohnClark
Posts: 7086
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Adding a 5th switcher

Post by JohnClark » Mon May 22, 2017 9:55 am

The Control Switcher will respond to Program Changes and can be named as a MIDI Device within the Device Name/Channel list on the Ground Control Pro.

I hope that helps!

Post Reply