PX-8 Plus question

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
Guit_fishN
Posts: 1
Joined: Sun May 28, 2017 4:51 pm

PX-8 Plus question

Post by Guit_fishN » Sun May 28, 2017 7:59 pm

Hi,

NOOB question: I was going to purchase a PX-8 Plus and wanted to confirm something. I've looked through the user manual and didn't see anything about pedal order.

Let's say you have a boost, a drive, and reverb. I want to make sure that I can presets such as the following:

Preset 1: boost, drive, delay
Preset 2: drive, boost, delay

without having to change any physical order of the pedals on the board.

Thanks for your time,

JohnClark
Posts: 7092
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: PX-8 Plus question

Post by JohnClark » Tue May 30, 2017 9:36 am

PX-8 Plus will not change the order of its Loops. The Loops are internally connected in series.

I hope this helps!

Post Reply