Help me JohnClark

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
Homero
Posts: 1
Joined: Sun Jul 02, 2017 3:35 pm

Help me JohnClark

Post by Homero » Sun Jul 02, 2017 3:40 pm

Please John Clark

How i Connect this ( Midi & Conf. )

Rocktron Piranha + T.C Eletronic G-Force + Ground Control Pro

thank you

Homero :|

JohnClark
Posts: 7088
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Help me JohnClark

Post by JohnClark » Wed Jul 05, 2017 10:31 am

If you have a 7 Pin MIDI Cable, you can use the Piranha to provide phantom power to the Ground Control Pro.

1. Ground Control Pro MIDI Out ---7 Pin MIDI Cable---> Piranha MIDI In.
2. Piranha MIDI Out/Thru ---Standard MIDI Cable---> G-Force MIDI In.

You will need to name the Piranha and the G-Force as MIDI devices in the Ground Control Pro. This is shown in the Device Name/Channel section of the Ground Control Pro user manual under Setup.
I'd suggest setting the Piranha to use MIDI Channel 1, and the G-Force to use MIDI Channel 2. You will also likely need to program the Piranha to set the MIDI Out/Thru jack as a Thru.

Let us know if you get stuck!

Post Reply