Px-8 plus versus switcher 4

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
orion32773
Posts: 4
Joined: Mon Mar 03, 2014 7:37 am

Px-8 plus versus switcher 4

Post by orion32773 » Fri Nov 17, 2017 4:38 pm

Aside from loops and more presets can anyone highlight major differences between these? I only have a few pedals I need to switch and midi control to switch my amp channels via the voodoo labs control switcher. Sorry if this was asked elsewhere. I found a used 4 button switcher so I thought about getting that instead of the 8.

JohnClark
Posts: 7088
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Px-8 plus versus switcher 4

Post by JohnClark » Mon Nov 20, 2017 12:35 pm

The PX-8+ is itself a MIDI Controller as well as a loop switcher. So it has presets that will recall any of its own loops and send a MIDI command to control the Control Switcher.

The original 4-Loop Pedal Switcher is only a loop switcher. It needs a MIDI Controller to have presets. It will not recall presets or send MIDI commands to control the Control Switcher without a MIDI Controller.
For instance, the Voodoo Lab Commander that was launched with the original 4-Loop Pedal Switcher would work to control the Pedal Switcher and Control Switcher.

I hope that helps!

Post Reply