Ground control pro how many ma needed?

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
boperlover
Posts: 1
Joined: Mon Dec 18, 2017 4:19 pm

Ground control pro how many ma needed?

Post by boperlover » Mon Dec 18, 2017 4:28 pm

I use the phatom power to supply the GCP through the Triaxis phantom output. I linked it in my TREX fuel tank ( 500 ma) . I need the TREX for some pedals too. So i dont know how many power left for the other pedals.
Can i use 12v for the GCP?
How many ma. need the GCP¿ is the same ma when you use phantom?

Thank you so much

JohnClark
Posts: 7129
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Ground control pro how many ma needed?

Post by JohnClark » Tue Dec 19, 2017 11:50 am

I wouldn't go below 400mA. Your 12VDC output should be ok for this. Current draw should be the same powering directly vs phantom power aside from the slight load a long MIDI cable might add.

I hope that helps!

Post Reply