Voodoo Lab

Helix and GCX
Page 1 of 1

Author:  neuk01642 [ Fri Dec 29, 2017 3:40 pm ]
Post subject:  Helix and GCX

Hey all
Looking to drive changes on my GCX from my Line 6 Helix.
Looking at the GCX manual its littered with warnings about connecting anything other than the Ground Control to the midi in on the GCX as pins 1 and 3 are powered.

Does anyone know if the midi out on the Helix has pins 1 and 3 connected and if it's OK to connect to the midi in on the GCX?



Author:  neuk01642 [ Sat Dec 30, 2017 3:06 am ]
Post subject:  Re: Helix and GCX

No one?
No opinions or thoughts? :cry:

Author:  JohnClark [ Wed Jan 03, 2018 11:18 am ]
Post subject:  Re: Helix and GCX

Sorry for the delay, we were closed over the last 10 days or so for the holidays.

I am not sure about pins 1 and 3 on the Helix MIDI Out... you may want to contact Line 6 about that.

Not all MIDI cables actually wire all five pins so, if you can, check your MIDI cable for continuity. Maybe you don't have to worry about it anyway ;)

Another option is to simply cut pins 1 and 3 out of at least one end of the MIDI cable just to be certain.

I hope that helps!

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group