Voodoo lab control swither for change ampli channel

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
luciopooh
Posts: 1
Joined: Sat Oct 20, 2018 4:16 am

Voodoo lab control swither for change ampli channel

Post by luciopooh » Sat Oct 20, 2018 4:22 am

Sorry for my english (i'm italian) Ok I try to ask the same
I bought the voodoo lab control switcher to connect it to the Pod and change the channel of my amplifier that has no Midi input but a simple switch with input Jack I had seen on YouTube the possibility to do it but does not explain the connections or programation, I inserted the cable Midi in the Midi out of the Line6 Pod the other end of the Midi cable in the input In of the voodoo lab switcher, then always from the Voodoo Lab switch came out with the stereo jack cable inserted in the input of the changer of my amp on the pod I set program change channel 1 but nothing happens absolutely You can give me a hand Surely something wrong

JohnClark
Posts: 7131
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Voodoo lab control swither for change ampli channel

Post by JohnClark » Mon Oct 22, 2018 3:01 pm

Sorry for the trouble!

Does the amp do anything when pressing the buttons on the Control Switcher?

Post Reply