Line6 DL4 and Whammy IV with the PP2

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
Posts: 7
Joined: Wed Nov 30, 2016 12:11 pm

Line6 DL4 and Whammy IV with the PP2

Post by franrh81 » Sat Mar 18, 2017 12:45 am

I'm trying to power my DL4 on 5 with the dip away from normal with my pp2 and for some reason it won't start. I bought it used and when i tried to turn it on it had nothing connect on it.

Also can I use my pp2 to power my whammy iv?

Posts: 7183
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Line6 DL4 and Whammy IV with the PP2

Post by JohnClark » Tue Mar 21, 2017 10:50 am

On a Pedal Power 2 you should be able to power a DL-4 from output 5 or 6 with the corresponding DIP switch set away from Normal.
Does the DL-4 work when powered from the original power adapter? Has the DL-4 had any of the once popular mods done to it... including changing its power jack?

The Whammy 4 requires AC power and cannot be powered from any of the DC power jacks on the front of the Pedal Power 2. You can power this from the Courtesy Outlet on the back of the Pedal Power 2 using the original power adapter.

I hope that helps!

Post Reply