Voodoo Lab

Thanks man! You saved this weekend’s gig!

Hi guys!

I have both a pp2+ and a 4x4. My question is if it is able to power a Line6 HX Effects and a Voodoo Lab GCP on my 4x4?
I have understood that I can power either the Line6 or GCP on the 5 and 6 with a doubler on the pp2+, but is it possible to power both on the 4x4?

Looking forward hearing from you guys!

Thanks a lot man!! You saved the day!!!

So, what will I do with the GCX1 - going from feedthru/guitar out to in on loop1 on gcx1?

Hello guys!
I´m trying to run a 2 GCX and a GCP rig, but I´m a little bit stuck here.
Everything is working; the switching and all but I only get the effects from the second gcx.
Here is my setup:
Guitar
wah
tuner
guitar in gcx 1
feedthru to in on loop1

loop1 - compressor
loop2 overdrive
loop3 distortion
loop4 klon
loop5 sparkle drive
loop6 delay

guitar out to guitar in on gcx2
feedthru to in on loop1

loop1 delay
loop2 drive
loop3 compressor
loop4 vibe
loop5 tremolo
loop6 chorus

then a Y cable
out from loop7 to a badcat stack
out from loop8 to a 65 amps stack.

I´ve tried to run a jack-cable from out of loop6 in gcx1 to in on loop1 on gcx.
Then every effect worked, but my general sound got colored even without any effect turned on,

I really need some help here guys.

Thank you so much!!

Just wonderin´again.

On the GCP, must I assign/setup the stompboxes in some way, or is it just plug and play. I´m not talking about presets now but just for testing the pedals?
(I know, I suck at explaining. I´m from Norway....baddest execuse ever!)

Mats

Thanx man! Helps a lot!
One quiestion though: What to do with the wah and the tuner?
Since I´m going wireless, will this do the trick? http://www.voodoolab.com/gcxdiagrams/13 ... nd_You.pdf

No channel switching and nothing in effects loop.

If I write my stompboxes and ideas of how to use the gcx and gcp - would you help me set it up by sending me a diagram of it or something?

Here it is:

My idea is to use 2 amps at the same time, all the time (with the possibility to also only use 1 amp if the stage isn´t big enough for 2 amps.
I want to have 3 four presets: 1 clean with compressor, 2 rhytm overdrive, 3 solo overdrive compressor
but also have the abillity to kick in one of my stompboxes whenever I feel to in a song.

My pedals: mxr compressor,
xotic bb preamp
xotic bb preamp mid boost
xotic eb booster
retro-sonic delay
klon centaur.

I also want to have my real mccoy wah and korg tuner on the pedalboard next to the gcp.
I am also using a Line6 Relay G90 wireless.

Please man, I need your help so bad!

Hey man!

I´m using distortion, delay and a compressor. Nothing through the effectsloops of the amps. Stompbox distortion.
I´m also using a Line 6 Relay G90 wireless.