Voodoo Lab

Hi there,
The midi out is supposed to be a mirror of midi in so should work as you wish it would.
Did you buy new or second hand? Only thing I can think of is if you bought it second hand, do a factory reset and start again and see if it still does this. If so, maybe this is why the person sold it.
I’d reset, leave it on channel 1 as no other device you have is set to this. Set it to receive cc and pc commands.

Looks like you have it sorted with the midi thru box but you should be able to daisy chain at least 8 devices.

See how you go

Hi there,
Yes and yes, the courtesy plug can handle 200w
Cheers

Hi there John,
Wondering if there is any info on the Voodoo Guitar Preamp?


The Voodoo Lab Guitar Preamp is being updated to include MIDI channel switching, front and rear input jacks, and a new footswitch. Same great tone with no changes to the audio path or cabinet simulator. Please check back for updated release info.???

Hmmm, yes. What is going on here John?

Hi there,
It will run from a 9v-12v DC 100ma outlet on the Pedal Power 2+ or 9v AC from the Pedal Power AC.

Hi there,
You need to power the pedal with the correct polarity, normal is centre negative, if you have a centre positive pedal, you need the correct cable to suit or make your own or modify a normal cable.

Here’s a link to Voodoo’s cables

http://www.voodoolab.com/shop/index.php?cPath=22

Cheers

Hi there,
I’d use the ME-80 on 1-4, it uses a PSA power supply and that’s what they are for, see how it goes. It should be fine, if not put it on 5 or 6 in normal position. With the Flashback, it needs to be in 5 or 6, in the normal position. The Pedal Power 2+, it will cut out if it gets overloaded, if it does with the ME-80 in 1-4, put it in 5 or 6. See how you go.

Cheers

Hi there,
They don’t seem to have much support, I have checked them out before, just did it again after you mentioned it. They definitely have more options, there just seems to be a few people not happy with them, some are though. It could be said for the GC Pro to I suppose

I’d like to give them a go though, if I could get one I would. Can’t even find any 2nd hand ones. The A-16 looks good to, similar to the Switchblade. I’d like to try one of them.

Did you read the post where John tells you how to configure the GCX’s with another controller? You should be able to do it.

Hi there,
Ahh ok, I’ve never played with that. Think I need to now

Cheer

Hi there,
It will be a nice setup man, it will work fine.

You can set it up as you have, with the G Force in the fx loop of the JMP-1 and a loop in the GCX or you can place it in between the JMP-1 and the EL34 100/100. If you do this, you make a preset in the G Force with no fx blocks activated and choose this in the preset in the GC Pro to have them off. You can set an Instant Access button to turn an fx block on in the G Force. Also, you will be able to turn the volume of you rig up and down with the input/output of the G Force. If you do it this way, you set the G Force to kill dry mode.

It’s up to you how you set it up, I prefer the way I’ve said, between the pre and power amps. At least this gives you an idea of what you can do. Good luck