It's a GFI System Wavelogic MkII- discontinued and not very well known.
From the manual:
"WL-MKII is powered using an external +12VDC power source capable of delivering 250 mA of current. If a 12VDC power source is not available, you can use a regulated 9VDC power source, with a slight reduction in headroom."
I'm hoping to get it the 12v, but it's way more convenient for me powering my board if I don't have to use 5+6.
Search found 2 matches
- Wed May 09, 2018 9:22 pm
- Forum: Pedal Power®
- Topic: Current Doubler Adapter cable (p/n PPAP)
- Replies: 68
- Views: 192557
- Fri May 04, 2018 1:47 pm
- Forum: Pedal Power®
- Topic: Current Doubler Adapter cable (p/n PPAP)
- Replies: 68
- Views: 192557
Re: Current Doubler Adapter cable (p/n PPAP)
I am trying to power a pedal that requires 12v / 250 mA using the PP2+ and have two questions...
1. If I use a current doubler on 5+6 with switches set away from normal, will the unregulated supply lead to sending a higher voltage than 12v to the 250mA pedal, and should I be concerned about this?
2. Can I use a current doubler on 4+5 with switches set away from normal to get 12v/260mA or will this be dangerous due to the difference in regulation between those outputs?
1. If I use a current doubler on 5+6 with switches set away from normal, will the unregulated supply lead to sending a higher voltage than 12v to the 250mA pedal, and should I be concerned about this?
2. Can I use a current doubler on 4+5 with switches set away from normal to get 12v/260mA or will this be dangerous due to the difference in regulation between those outputs?