Correct cable/outlet needed for QTron+ for Mondo/4x4

[jflan5150]

I currently have a Mondo and a 4x4 and was curious what the correct cable and input I should be using to power my 24v Q-Tron+?

Also curious what cable and inputs I should use to power my EVH Flanger, which is 18v?

Thanks in advance - just not real curious to find out the wrong way to plug in these pedals with the Mondo or 4x4 and possibly fry my pedals.

[Rez]

To power the Q-Tron+ (24VDC), use a Voltage Doubler Cable (reverse polarity, 2.5/2.1mm), part# PPEH24 in any two 12V outputs. Note, if the 12V output of a 9/12V pair is used... leave the paired 9V output empty.

To power the 18V EVH Flanger, use any two 9V outputs with a Voltage Doubler Cable (standard polarity, 2.1mm), part# PPY. Note, if the 9V output of a 9/12V pair is used... leave the paired 12V output empty.


Hope this helps!